2. Boost Unordered Translation (zh_Hans)
3. Chinese (Simplified Han script)
4. Zen

399 :1632
	English Returns:;; The number of elements inserted. Concurrency:;; Blocking on `*this` and `source`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回值：;; 插入的元素数量。 并发特性：;; 阻塞当前容器 `*this` 与源容器 `source`。 53/920 · 92 Needs editing
401 :1501
	English Effects:;; Sets to zero the internal statistics kept by the container. Notes:;; Only available if xref:reference/stats.adoc#stats[statistics calculation] is xref:unordered_node_map_boost_unordered_enable_stats[enabled].
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 效果：将容器内部维护的统计信息归零。 注意：仅在 xref:reference/stats.adoc#stats[统计计算] 通过 xref:unordered_node_map_boost_unordered_enable_stats[`BOOST_UNORDERED_ENABLE_STATS`] 启用时才可用。 160/2190 · 219 Needs editing
401 :1537
	English Returns:;; The index of the bucket which would contain an element with key `k`. Postconditions:;; The return value is less than `bucket_count()`. Notes:;; The `template<class K>` overload only participates in overload resolution if `Hash::is_transparent` and `Pred::is_transparent` are valid member typedefs. The library assumes that `Hash` is callable with both `K` and `Key` and that `Pred` is transparent. This enables heterogeneous lookup which avoids the cost of instantiating an instance of the `Key` type.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回：;; 包含键 `k` 的元素的桶索引。 后置条件：;; 返回值小于 `bucket_count()`。 备注：;; 仅当 `Hash::is_transparent` 和 `Pred::is_transparent` 是有效的成员 typedef 时，`template<class k="">` 重载才会参与重载决议。库假定 `Hash` 可同时以 `K` 和 `Key` 类型调用，且 `Pred` 是透明的。这支持了异构查找，从而避免了实例化 `Key` 类型的开销。</class> 248/5120 · 512 Needs editing
402 :1635
	English Returns:;; The maximum number of elements the table can hold without rehashing, assuming that no further elements will be erased. Note:;; After construction, rehash or clearance, the table's maximum load is at least `max_load_factor() * bucket_count()`. This number may decrease on erasure under high-load conditions. + + In the presence of concurrent insertion operations, the value returned may not accurately reflect the true state of the table right after execution.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回值：容器在不进行重哈希的前提下可容纳的最大元素数量（假定不会再擦除任何元素）。 说明：容器在构造、重哈希或清空后，其最大负载量至少为 `max_load_factor() * bucket_count()`。在高负载条件下执行擦除操作时，该数值可能会降低。 若存在并发插入操作，返回值可能无法精确反映容器执行后的真实状态。 163/4700 · 470 Needs editing
405 :1509
	English - It has an `InputIterator` template parameter and a type that does not qualify as an input iterator is deduced for that parameter. - It has an `Allocator` template parameter and a type that does not qualify as an allocator is deduced for that parameter. - It has a `Hash` template parameter and an integral type or a type that qualifies as an allocator is deduced for that parameter. - It has a `Pred` template parameter and a type that qualifies as an allocator is deduced for that parameter.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — - 它具有一个 `InputIterator` 模板参数，并且为该参数推导出的类型不符合输入迭代器的要求。 - 它具有一个 `Allocator` 模板参数，并且为该参数推导出的类型不符合分配器的要求。 - 它具有一个 `Hash` 模板参数，并且为该参数推导出的类型是整数类型或符合分配器的要求。 - 它具有一个 `Pred` 模板参数，并且为该参数推导出的类型符合分配器的要求。 191/4940 · 494 Needs editing
405 :1551
	English Requires:;; `n` shall be in the range `[0, bucket_count())`. Returns:;; A local iterator pointing the first element in the bucket with index `n`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 要求：;; `n` 应在 `[0, bucket_count())` 范围内。 返回：;; 指向索引为 `n` 的桶中第一个元素的局部迭代器。 71/1450 · 145 Needs editing
406 :1649
	English Changes if necessary the size of the bucket array so that there are at least `n` buckets, and so that the load factor is less than or equal to the maximum load factor. When applicable, this will either grow or shrink the `bucket_count()` associated with the table.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 效果：必要时调整桶数组的大小，使桶数量至少为 `n`，且负载因子小于等于最大负载因子。 适用场景下，该操作会**增大或缩小**容器的桶数量 `bucket_count()`。 87/2640 · 264 Needs editing
:1532 :1532
	English Concurrency:;; Blocking on `x` and `y`. Notes:;; Behavior is undefined if the two tables don't have equivalent equality predicates.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 并发：;; 对`x`和`y`进行阻塞。 备注：;; 若两个哈希表的相等判断谓词不一致，行为未定义。 49/1310 · 131 Needs editing
409 :1656
	English Throws:;; The function has no effect if an exception is thrown, unless it is thrown by the table's hash function or comparison function. Concurrency:;; Blocking on `*this`. ---
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 异常：若抛出异常，函数无任何效果（由容器的哈希函数或比较函数抛出的异常除外）。 并发：阻塞当前对象 `*this`。 58/1760 · 176 Needs editing
409 :1448
	English Requires:;; `value_type` is https://en.cppreference.com/w/cpp/named_req/MoveInsertable[MoveInsertable^]. `x.key_equal()` is functionally equivalent to `other.key_equal()`. Note:;; If the archive was saved using a release of Boost prior to Boost 1.84, the configuration macro `BOOST_UNORDERED_ENABLE_SERIALIZATION_COMPATIBILITY_V0` has to be globally defined for this operation to succeed; otherwise, an exception is thrown.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 要求：`value_type` 必须满足 https://en.cppreference.com/w/cpp/named_req/MoveInsertable[可移动插入^]。`x.key_equal()` 在功能上必须等价于 `other.key_equal()`。 注意：如果归档是使用 Boost 1.84 之前版本的 Boost 保存的，则必须全局定义配置宏 `BOOST_UNORDERED_ENABLE_SERIALIZATION_COMPATIBILITY_V0` 才能使此操作成功；否则，将抛出异常。 260/4230 · 423 Needs editing
409 :1563
	English Requires:;; `n` shall be in the range `[0, bucket_count())`. Returns:;; A local iterator pointing the 'one past the end' element in the bucket with index `n`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 要求：;; `n` 应在 `[0, bucket_count())` 范围内。 返回：;; 指向索引为 `n` 的桶中“尾后”元素的局部迭代器。 72/1580 · 158 Needs editing
412 :1459
	English Effects:;; `x.swap(y)` Throws:;; Doesn't throw an exception unless it is thrown by the copy constructor or copy assignment operator of `key_equal` or `hasher`. Notes:;; The exception specifications aren't quite the same as the C++11 standard, as the equality predicate and hash function are swapped using their copy constructors.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 效果：`x.swap(y)` 抛出：除非 `key_equal` 或 `hasher` 的拷贝构造函数或拷贝赋值运算符抛出异常，否则不抛出任何异常。 注意：异常规范与 C++11 标准不完全相同，因为相等谓词和哈希函数是使用其拷贝构造函数进行交换的。 129/3290 · 329 Needs editing
:1547 :1547
	English Concurrency:;; Blocking on `x` and `y`. Notes:;; Behavior is undefined if the two tables don't have equivalent equality predicates.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 并发：;; 阻塞`x`与`y`。 备注：;; 若两个哈希表的相等谓词不兼容，行为未定义。 44/1310 · 131 Needs editing
413 :1574
	English Requires:;; `n` shall be in the range `[0, bucket_count())`. Returns:;; A constant local iterator pointing the first element in the bucket with index `n`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 要求：;; `n` 应在 `[0, bucket_count())` 范围内。 返回：;; 指向索引为 `n` 的桶中第一个元素的常量局部迭代器。 73/1540 · 154 Needs editing
415 :1672
	English Throws:;; The function has no effect if an exception is thrown, unless it is thrown by the table's hash function or comparison function. Concurrency:;; Blocking on `*this`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 异常：若抛出异常，函数无任何效果（由容器的哈希函数或比较函数抛出的异常除外）。 并发：阻塞当前对象 `*this`。 58/1720 · 172 Needs editing
417 :1475
	English Returns:;; The number of erased elements. Notes:;; Equivalent to: + + ```c++ auto original_size = c.size(); for (auto i = c.begin(), last = c.end(); i != last; ) { if (pred(*i)) { i = c.erase(i); } else { ++i; } } return original_size - c.size(); ``` + Note that the references passed to `pred` are non-const.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回：被擦除的元素数量。 注意：等价于： ```c++auto original_size = c.size();for (auto i = c.begin(), last = c.end(); i != last; ) {if (pred(*i)) {i = c.erase(i);} else {++i;}}return original_size - c.size(); ``` 注意，传递给 `pred` 的引用是非常量的。 220/3090 · 309 Needs editing
417 :1679
	English Returns:;; The number of elements with key equivalent to `k` (0 or 1). Notes:;; The `template<class K>` overload only participates in overload resolution if `Hash::is_transparent` and `Pred::is_transparent` are valid member typedefs. The library assumes that `Hash` is callable with both `K` and `Key` and that `Pred` is transparent. This enables heterogeneous lookup which avoids the cost of instantiating an instance of the `Key` type. + + In the presence of concurrent insertion operations, the value returned may not accurately reflect the true state of the table right after execution.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回值：;; 与键 `k` 等价的元素数量（值为 0 或 1）。 注意：;; 仅当 `Hash::is_transparent` 和 `Pred::is_transparent` 是有效的成员类型别名时，`template<class k="">` 重载版本才参与重载决议。库假定 `Hash` 可同时接受 `K` 类型与 `Key` 类型作为参数，且 `Pred` 是透明的。这支持异构查找，从而避免实例化 `Key` 类型对象带来的性能开销。 在存在并发插入操作的情况下，返回的值可能无法精确反映执行后容器的真实状态。</class> 269/5900 · 590 Needs editing
417 :1585
	English Requires:;; `n` shall be in the range `[0, bucket_count())`. Returns:;; A constant local iterator pointing the 'one past the end' element in the bucket with index `n`.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 要求：;; `n` 应在 `[0, bucket_count())` 范围内。 返回：;; 指向索引为 `n` 的桶中“尾后”元素的常量局部迭代器。 74/1670 · 167 Needs editing
418 :1561
	English Returns:;; The maximum number of elements the table can hold without rehashing, assuming that no further elements will be erased. Note:;; After construction, rehash or clearance, the table's maximum load is at least `max_load_factor() * bucket_count()`. This number may decrease on erasure under high-load conditions. + + In the presence of concurrent insertion operations, the value returned may not accurately reflect the true state of the table right after execution.
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回值：;; 表在不进行重哈希的情况下可容纳的最大元素数量（假定不会再删除任何元素）。 注意：;; 构造、重哈希或清空后，表的最大负载量至少为 `max_load_factor() * bucket_count()`。在高负载条件下执行删除操作时，该数值可能会降低。 注意：;; 若存在并发插入操作，返回值可能无法精确反映执行后表的真实状态。 171/4700 · 470 Needs editing
420 :1685
	English Returns:;; A statistical description of the insertion and lookup operations performed by the table so far. Notes:;; Only available if xref:reference/stats.adoc#stats[statistics calculation] is xref:concurrent_flat_map_boost_unordered_enable_stats[enabled].
	Chinese (Simplified Han script) ↹ ↵ NBS … 「 」 『 』 ﹙-﹚ ‐ – — 返回值：容器截至目前执行的插入与查找操作的统计描述信息。 说明：仅当**启用统计计算**时，该函数才可用。 53/2560 · 256 Needs editing