Boost Unordered Translation (zh_Hans)/Doc / Modules / Root / Pages / Reference / Unordered Multiset (adoc) — Chinese (Simplified Han script) @ Boost-Weblate: ```c++ unordered_multiset& operator=(unordered_multiset&& other) noexcept(boost::allocator_traits<Allocator>::is_always_equal::value && boost::is_nothrow_move_assignable_v<Hash> && boost::is_nothrow_move_assignable

Zen

Translation

English

Chinese (Simplified Han script)

Needs editing

Skip

Key	English	Chinese (Simplified Han script)
	Constructs an empty container with at least `n` buckets, using `hf` as the hash function, `a` as the allocator and a maximum load factor of 1.0 and inserts the elements from `il` into it.	构造一个至少包含 `n` 个桶的空容器，使用 `hf` 作为哈希函数，`a` 作为分配器，最大负载因子为 `1.0`，并将 `il` 中的元素插入其中。
:562	Requires:;; `key_equal` needs to be https://en.cppreference.com/w/cpp/named_req/DefaultConstructible[DefaultConstructible^].	要求：`key_equal` 需要满足 https://en.cppreference.com/w/cpp/named_req/DefaultConstructible[可默认构造^]。
:564	---	---
	Destructor	析构函数
	```c++ ~unordered_multiset(); ```	```c++ ~unordered_multiset(); ```
	Note:;; The destructor is applied to every element, and all memory is deallocated	注意：析构函数会应用于每个元素，并且所有内存都会被释放。
:575	---	---
	Assignment	赋值操作
	Copy Assignment	复制赋值
	```c++ unordered_multiset& operator=(const unordered_multiset& other); ```	```c++ unordered_multiset& operator=(const unordered_multiset& other); ```
	The assignment operator. Copies the contained elements, hash function, predicate and maximum load factor but not the allocator.	赋值运算符。拷贝所包含的元素、哈希函数、谓词和最大负载因子，但不拷贝分配器。
	If `Alloc::propagate_on_container_copy_assignment` exists and `Alloc::propagate_on_container_copy_assignment::value` is `true`, the allocator is overwritten, if not the copied elements are created using the existing allocator.	如果 `Alloc::propagate_on_container_copy_assignment` 存在且 `Alloc::propagate_on_container_copy_assignment::value` 为 `true`，则分配器会被覆盖；否则，拷贝的元素将使用现有的分配器创建。
:590	Requires:;; `value_type` is copy constructible	要求：`value_type` 可拷贝构造。
:592	---	---
	Move Assignment	移动赋值
	```c++ unordered_multiset& operator=(unordered_multiset&& other) noexcept(boost::allocator_traits<Allocator>::is_always_equal::value && boost::is_nothrow_move_assignable_v<Hash> && boost::is_nothrow_move_assignable_v<Pred>); ``` The move assignment operator.	```c++unordered_multiset& operator=(unordered_multiset&& other) noexcept(boost::allocator_traits<allocator>::is_always_equal::value && boost::is_nothrow_move_assignable_v<hash> && boost::is_nothrow_move_assignable_v<pred>);```移动赋值运算符。</pred></hash></allocator>
	If `Alloc::propagate_on_container_move_assignment` exists and `Alloc::propagate_on_container_move_assignment::value` is `true`, the allocator is overwritten, if not the moved elements are created using the existing allocator.	如果 `Alloc::propagate_on_container_move_assignment` 存在且 `Alloc::propagate_on_container_move_assignment::value` 为 `true`，则分配器会被覆盖；否则，移动的元素将使用现有的分配器创建。
	Requires:;; `value_type` is move constructible.	要求：`value_type` 可移动构造。
:608	---	---
	Initializer List Assignment	初始化列表赋值
	```c++ unordered_multiset& operator=(std::initializer_list<value_type> il); ```	```c++ unordered_multiset& operator=(std::initializer_list<value_type> il); ```</value_type>
	Assign from values in initializer list. All existing elements are either overwritten by the new elements or destroyed.	从初始化列表中的值进行赋值。所有现有元素要么被新元素覆盖，要么被销毁。
	Requires:;; `value_type` is https://en.cppreference.com/w/cpp/named_req/CopyInsertable[CopyInsertable^] into the container and https://en.cppreference.com/w/cpp/named_req/CopyAssignable[CopyAssignable^].	要求：`value_type` 必须能够从容器中 https://en.cppreference.com/w/cpp/named_req/CopyInsertable[可拷贝插入^] 并且满足 https://en.cppreference.com/w/cpp/named_req/CopyAssignable[可拷贝赋值^]。
:620	---	---
	Iterators	迭代器
:624	begin	开始
	```c++ iterator begin() noexcept; const_iterator begin() const noexcept; ```	```c++ iterator begin() noexcept; const_iterator begin() const noexcept; ```
	Returns:;; An iterator referring to the first element of the container, or if the container is empty the past-the-end value for the container.	返回：指向容器第一个元素的迭代器，如果容器为空则返回容器的尾后迭代器。
:633	---	---
:635	end	结束
	```c++ iterator end() noexcept; const_iterator end() const noexcept; ```	```c++ iterator end() noexcept; const_iterator end() const noexcept; ```

	English	Chinese (Simplified Han script)	Actions
	_Hash_	_Hash_
	A unary function object type that acts a hash function for a `Key`. It takes a single argument of type `Key` and returns a value of type `std::size_t`.	一个一元函数对象类型，用作 `Key` 的哈希函数。它接受一个 `Key` 类型的参数，并返回一个 `std::size_t` 类型的值。
	Configuration macros	配置宏
	Bucket Count Constructor	桶数构造函数
	Iterator Range Constructor	迭代器范围构造函数
	```c++ unordered_multiset(const unordered_multiset& other); ```	```c++ unordered_multiset(const unordered_multiset& other); ```
	initializer_list Constructor with Bucket Count and Hasher and Allocator	带桶数、哈希函数和分配器的初始化列表构造函数
	```c++ unordered_multiset(std::initializer_list<value_type> il, size_type n, const hasher& hf, const allocator_type& a); ```	```c++ unordered_multiset(std::initializer_list<value_type> il, size_type n, const hasher& hf, const allocator_type& a); ```</value_type>
	Constructs an empty container with at least `n` buckets, using `hf` as the hash function, `a` as the allocator and a maximum load factor of 1.0 and inserts the elements from `il` into it.	构造一个至少包含 `n` 个桶的空容器，使用 `hf` 作为哈希函数，`a` 作为分配器，最大负载因子为 `1.0`，并将 `il` 中的元素插入其中。
	Destructor	析构函数
	```c++ ~unordered_multiset(); ```	```c++ ~unordered_multiset(); ```
	Note:;; The destructor is applied to every element, and all memory is deallocated	注意：析构函数会应用于每个元素，并且所有内存都会被释放。
	```c++ unordered_multiset& operator=(const unordered_multiset& other); ```	```c++ unordered_multiset& operator=(const unordered_multiset& other); ```
	The assignment operator. Copies the contained elements, hash function, predicate and maximum load factor but not the allocator.	赋值运算符。拷贝所包含的元素、哈希函数、谓词和最大负载因子，但不拷贝分配器。
	If `Alloc::propagate_on_container_copy_assignment` exists and `Alloc::propagate_on_container_copy_assignment::value` is `true`, the allocator is overwritten, if not the copied elements are created using the existing allocator.	如果 `Alloc::propagate_on_container_copy_assignment` 存在且 `Alloc::propagate_on_container_copy_assignment::value` 为 `true`，则分配器会被覆盖；否则，拷贝的元素将使用现有的分配器创建。
	```c++ unordered_multiset& operator=(unordered_multiset&& other) noexcept(boost::allocator_traits<Allocator>::is_always_equal::value && boost::is_nothrow_move_assignable_v<Hash> && boost::is_nothrow_move_assignable_v<Pred>); ``` The move assignment operator.	```c++unordered_multiset& operator=(unordered_multiset&& other) noexcept(boost::allocator_traits<allocator>::is_always_equal::value && boost::is_nothrow_move_assignable_v<hash> && boost::is_nothrow_move_assignable_v<pred>);```移动赋值运算符。</pred></hash></allocator>
	```c++ const_iterator cend() const noexcept; ```	```c++ const_iterator cend() const noexcept; ```
	Returns:;; A `const_iterator` which refers to the past-the-end value for the container.	返回：指向容器尾后值的 `const_iterator`。
	Size and Capacity	大小与容量
	Returns:;; `size()` of the largest possible container.	返回：可能的最大容器的 `size()`。
	Requires:;; `value_type` is https://en.cppreference.com/w/cpp/named_req/EmplaceConstructible[EmplaceConstructible^] into `X` from `args`. Returns:;; An iterator pointing to the inserted element. Throws:;; If an exception is thrown by an operation other than a call to `hasher` the function has no effect. Notes:;; Can invalidate iterators, but only if the insert causes the load factor to be greater to or equal to the maximum load factor. + + Pointers and references to elements are never invalidated.	要求：`value_type` 必须可以从 `args` 出发在 `X` 中进行 https://en.cppreference.com/w/cpp/named_req/EmplaceConstructible[可原位构造^]。返回：指向已插入元素的迭代器。抛出：如果除调用 `hasher` 之外的操作抛出异常，则该函数无效果。注意：可能使迭代器失效，但仅当插入导致负载因子大于或等于最大负载因子时才会发生。指向元素的指针和引用永远不会失效。
	emplace_hint	emplace_hint
	Move Insert	移动插入
	```c++ iterator insert(value_type&& obj); ```	```c++ iterator insert(value_type&& obj); ```
	Requires:;; `value_type` is https://en.cppreference.com/w/cpp/named_req/MoveInsertable[MoveInsertable^]. Returns:;; An iterator pointing to the inserted element. Throws:;; If an exception is thrown by an operation other than a call to `hasher` the function has no effect. Notes:;; Can invalidate iterators, but only if the insert causes the load factor to be greater to or equal to the maximum load factor. + + Pointers and references to elements are never invalidated.	要求：`value_type` 满足 https://en.cppreference.com/w/cpp/named_req/MoveInsertable[可移动插入^]。返回：指向已插入元素的迭代器。抛出：如果除调用 `hasher` 之外的操作抛出异常，则该函数无效果。注意：可能使迭代器失效，但仅当插入导致负载因子大于或等于最大负载因子时才会发生。指向元素的指针和引用永远不会失效。
	Copy Insert with Hint	带提示的复制插入
	```c++ iterator insert(const_iterator hint, const value_type& obj); ```	```c++ iterator insert(const_iterator hint, const value_type& obj); ```
	Requires:;; `value_type` is https://en.cppreference.com/w/cpp/named_req/CopyInsertable[CopyInsertable^]. Returns:;; An iterator pointing to the inserted element. Throws:;; If an exception is thrown by an operation other than a call to `hasher` the function has no effect. Notes:;; The standard is fairly vague on the meaning of the hint. But the only practical way to use it, and the only way that Boost.Unordered supports is to point to an existing element with the same key. + + Can invalidate iterators, but only if the insert causes the load factor to be greater to or equal to the maximum load factor. + + Pointers and references to elements are never invalidated.	要求：`value_type` 满足 https://en.cppreference.com/w/cpp/named_req/CopyInsertable[可拷贝插入^]。返回：指向已插入元素的迭代器。抛出：如果除调用 `hasher` 之外的操作抛出异常，则该函数无效果。注意：标准关于 `hint` 的含义表述相当模糊。但唯一实际的使用方式，也是 Boost.Unordered 支持的唯一方式，是将其指向一个具有相同键的已存在元素。可能使迭代器失效，但仅当插入导致负载因子大于或等于最大负载因子时才会发生。指向元素的指针和引用永远不会失效。
	Insert with Hint and `node_handle`	带提示和 `node_handle` 的插入
	```c++ iterator insert(const_iterator hint, node_type&& nh); ```	```c++ iterator insert(const_iterator hint, node_type&& nh); ```

Loading…

admin

Translation uploaded

English

Chinese (Simplified Han script) 62 characters editedCurrent translationState: Translated

06/05/2026

admin

String added in the repository

English

Chinese (Simplified Han script) 258 characters editedPrevious translationState: Needs editing (Needs rewriting)

06/05/2026

Browse all string changes

Things to check

Consecutive duplicated words

The following word is duplicated: amp;

Reset

Mismatched full stop

Source and translation do not both end with a full stop.

Reset

Glossary

English	Chinese (Simplified Han script)
No related strings found in the glossary.

String information

Flags

safe-html, strict-same

Unit identifier

54666

Source string location

:595

String age

06/05/2026

Last updated

06/06/2026

Source string age

06/05/2026

Translation file AsciiDoc file

doc/modules/ROOT/pages/reference/unordered_multiset_zh_Hans.adoc, string 131

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the previous translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.

Translation

Things to check

Consecutive duplicated words

Mismatched full stop

Glossary

String information

Flags

Details

Unit identifier

Source string location

String age

Last updated

Source string age

Translation file AsciiDoc file